Latviešu 
Русский 
 |
 |
 |
 |
| SPEED WORK |
RELIABLE QUALITY |
LOW COST | ENVIRONMENTALLY FRIENDLY |
| Fast and easy foundation installing. Possibility to avoid excavation and ground leveling. Work can be done at any time of the year. | We ensure the quality of welding in accordance with the standard EN 1090-1: 2009 + A1: 2011, class EXC3. |
Less expensive than a concrete foundation. High maintainability. Is not affected by groundwater. |
There is no need to use heavy machinery. Minimally affected vegetation. Not torn soil. The ability to re-use screw piles. The absence of vibration during burial. |
Screw piles (screwpiers, helical piles, helical anchors, screw anchors, screw foundations and helical piers) are a steel screw-in piling and ground anchoring system used for building deep foundations. Screwpiles are manufactured using varying sizes of tubular hollow sections for the pile or anchors shaft.
Screw piles has enhanced scope of applications. They can be used on the marshy soils, soils with a high level of groundwater. They also allow the carrying out of works in the immediate closeness of the underground utilities, trees or in dense urban areas. 
Screw piles are ready for full design load right after screwing in. Utilities can be designed in parallel with the construction of the house. All works, if necessary, can be performed manually.
Application of screw piles
Screw pile is a useful option for foundation that is certified and meets all building regulations requirements. Helical piles are usually used on weak soils, with load-bearing capacity and on high water level areas. In addition, screw piles are used for fences, piers, sheds, road signs, temporary structures, etc.
Designed for individual, industrial or hydro construction: different types of building foundations, monolithic slab reinforcement, for fixing ground, that is settling or rising as well as in piers and bridges.
screw piles, steel screw-in foundations, screw piers, helical piles, helical anchors, screw anchors, screw foundations and helical piers.
We offer to buy
single, two, three or four blade screw piles. Rods of helical piles can be manufactured from:
- round pipes with diameter 60.3 mm-159mm and thickness 3mm-8mm;
- Square pipes with dimensions 60x60mm-120x120mm, thickness of 3mm -8mm.
Helical piles’ load bearing capacity, depending on the type, is from 0.5 t up to 35t. The blade diameters are ranging from 150mm to 500mm, thickness from 5mm to 12mm. We can producē different kind of a srew pile if needed, as well as helical piles, whose load bearing capacity is more than 35t. The length of piles is starting from 0.5 m up to unlimited, screw pile can be extended to the desired lengt, extension sections are either 1m, 2m, 3m.
Corrosion protection of screw piles is provided.
We also offering assembling screw piles, performed by our partners.
